Sale!

10-Outlet 1U Horizontal PDU Rack Mount Power Strip – Surge Protector,100-240V/15A/1800 Joules,for Network Servers,Power Conditioner with 10 Individual Switches and 6 ft Power Cord

Add your review

Original price was: $59.99.Current price is: $5.99.

Original price was: $59.99.Current price is: $5.99.

Sale!

Note: Prices may fluctuate as sellers adjust them regularly. You'll see the latest price at final checkout.
Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare


Product description

Server Rack-Mount Power Strip Surge Protector 10 Outlet

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. 1U PDU Rackmount Power Strip Surge Protector 10KA Merchant Video

10 Outlet Rack Mount Power Strip 10P-SP10P-SP

10 Outlets Output rating 15 Amp / 110-240 Volt. With 1800 Joules surge protection, the power outlet withstands spikes and fluctuations.

The network-grade full metal rack-mount PDU power strip with 10 outlets, is satisfied with the simultaneous use of multiple devices.

High Quality Power Strip Surge Protector OutletOutlet 10 US Standard AC Outlets

There are 10 Outlets and 10 independent switches on each PDU power center

1212 6FT Heavy Duty Power Cord

6-foot long cord gives you the added convenience of being able to plug in the power bar almost anywhere without having to use an extra extension cord.

OutletOutlet Metal Rack Mount Power Strips

180-degree rotatable mounting bracket.

This mountable power strip can mount in any server rack 19″ in depth or greater.

Independent switchIndependent switch 15 Amp Circuit Breaker Switch

Wall mount power strip with switch, 1800J surge protector can absorb excess voltage to provide superior protection for your electronics devices.

Versatile Rackmount Options 10P-SP10P-SP

Fit for Data centers and Network Closets 10P-SP10P-SP

10-Outlet Metal Wall-Mount Power Strip and Rack-Mount and Desktop Mount 10P-SP10P-SP

This wall mount power outlet is used in a very wide range, such as rack enclosure, cabinet, workbench, wall mount, under-counter, and other mount-installation applications.

Is the rack-mount size standard? I saw someone say that its screw holes are not aligned.

The rack-mount size of this PDU is standard 19 inches. When installing, all 4 rack screws need to be screwed into the rack and tightened at the same time. Note: Do not tighten one screw before installing the next one.

Will the plug of this surge protector fall off easily? Some people say that its socket is not firm.

Its plug will not fall off easily. This product has passed ETL certification. It is an international brand. Every product is inspected and tested before leaving the factory.

10 What should I do if the switch power socket is not powered on?

If the product is not powered on, you can check whether the fuse at the AC input socket is blown, or check whether the overload protection switch is turned on. If it is turned on, you can reset it manually.

The power cord described is 16 AWG wire gauge. Can it carry a total current of 15A?

You don’t need to worry. The cables and connectors of this product are made of national standard pure copper wire cores. After testing, they can easily carry 15A current.

Can the 10-socket independent switching power strip power my server?

If your server requires no more than 15A, it will have no problem, and it has an overload protection device to ensure the normal operation of your server.

Efficient Power Cable Management: The UltraPoE 1U Server Rack Mount Power Strip PDU is designed for industrial network racks, offering an additional 10 outlets, each with individual switches for easy power management.
Rack-Mounted Power Sockets: This 1U PDU features a 19-inch design and delivers AC power to data centers and network closets with 100V-240V / 15A / 50-60Hz power output and a 6ft long power cord.
Advanced Surge Protection: Our IT-grade rackmount PDU includes 1800 joules of surge protection, ensuring that your valuable equipment is safeguarded from power fluctuations and voltage spikes.
Durable and Reliable: Made of rugged steel chassis, our power strip features power and reset switches for easy control of power state, and a built-in circuit breaker with reset switch for reliable power distribution and organization.
Versatile Applications: Suitable for various applications such as studio, gamer setups, workbenches, server racks, and more, our rack mountable power strip provides efficient power distribution and organization for any setup.
Special Note: When the power board is not powered on, it is very likely that the overcurrent protection switch is turned on. You need to unplug all output power plugs behind the socket, The power board needs to be powered on, and the overcurrent protection switch needs to be manually pressed to reset

8 reviews for 10-Outlet 1U Horizontal PDU Rack Mount Power Strip – Surge Protector,100-240V/15A/1800 Joules,for Network Servers,Power Conditioner with 10 Individual Switches and 6 ft Power Cord

0.0 out of 5
0
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. William gupton.

    Much better now
    It made my work flow in my recording studio smooth

    Helpful(0) Unhelpful(0)You have already voted this
  2. MR RANDY W THON

    Fits well in rack, quality product
    Great for rack power management

    Helpful(0) Unhelpful(0)You have already voted this
  3. EdNetman

    Perfect solution!
    So many rack mount power supplies have the outlets on the front which makes no sense since all the components are wired in the back.This works great because the outlets are in the back so the front of the rack is nice and clean. Then you have a single lighted switch that controls them all.Perfect solution that I would buy again!

    Helpful(0) Unhelpful(0)You have already voted this
  4. Fletch

    Check Polarity Before Using
    I bought this one because it was the perfect size for a portable cabinet I built for my guitar rig. Once I got everything installed and wired up, I decided to use an outlet tester to verify operation before turning on the equipment I was going to plug into the Power Unit. Good thing I did. The neutral and the hot wires inside this Power Strip were ALL reversed. It may have damaged my gear if I hadn’t thought to check it first with my outlet tested. Since I had everything built and ready to go, I decided to rewire the power strip myself so I would know it was wired correctly before using. It is nicely built inside, although I could have done with not having to get into it that deeply. Good sturdy construction, but BEWARE, it might not come wired correctly from the factory. TEST BEFORE USING.

    Helpful(0) Unhelpful(0)You have already voted this
  5. BEETTO

    Good quality
    work as intended and easy to install. I was able to set up with no issues and install it on my network rack. the quality of the product is really good

    Helpful(0) Unhelpful(0)You have already voted this
  6. Marc H

    STAY AWAY DO NOT BUY. Already FAILED after only 1 year give or take of minimal use.
    STAY AWAY, DO NOT BUY. this is not a reliable PDU surge protector meant for use with important equipment in a server rack.Surge protectors that are this expensive, especially ones meant to be used in a server rack shouldn’t fail this easily with the kind of issue I am having. At first I thought this was only on 1 single port of the PDU but noticed today when I had my network go down while family was in the middle of a work meeting, that it is actually multiple ports that have the following issue.Multiple ports are already broken and causing loss of power to devices if the power plug is even just lightly tapped or wiggled literally no joke even just a mm. This was a almost $70 PDU Surge Protector that hasn’t ever had it’s circuit breaker tripped and hasn’t ever had anything plugged in and out of the ports on it more than 3 times since delivery in Feb. 2024.

    Helpful(0) Unhelpful(0)You have already voted this
  7. David D. Nelson

    Functional but 1U mounting holes are too close together.
    This appears to be functioning just fine if you only need 6 outlets for your rack. It has a single master switch which turns off all of the outlets at once. The switch is lighted. It is listed as a 1U device. Its physical height does match that spec but the mounting ears on each side have holes which are too close together to match 1U mounting hole spacing. This is why I only gave it 4 stars. I didn’t want to go through the hassle of returning the unit so I used my Dremel tool to enlarge both the top and bottom holes so they would fit a standard rack.

    Helpful(0) Unhelpful(0)You have already voted this
  8. Lonster Monster

    Great rack switch
    This switch has 2 of my favorite things. It has good plug spacing and nice bright lights. The switches seem to be really good quality. It has an overload breaker. That’s always a nice feature. I would highly recommend this rack switch.

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    5 + 1 =
    Powered by MathCaptcha

    10-Outlet 1U Horizontal PDU Rack Mount Power Strip – Surge Protector,100-240V/15A/1800 Joules,for Network Servers,Power Conditioner with 10 Individual Switches and 6 ft Power Cord
    10-Outlet 1U Horizontal PDU Rack Mount Power Strip – Surge Protector,100-240V/15A/1800 Joules,for Network Servers,Power Conditioner with 10 Individual Switches and 6 ft Power Cord

    Original price was: $59.99.Current price is: $5.99.

    Fit N Fresh Co – Elevate Your Health & Fitness Lifestyle
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart